Table of Contents
Advertisement
Configure the Connect IT 16/48
Field
Frequency
Modem firmware update
Configuration check
7. Configure a custom script to be run during the specified maintenance window.
a. Expand the Custom Scripts section.
b.
c. Verify that the Enable option is selected.
d. Complete the fields in each of the sections. To display information about what you
8. Click Save or Apply.
Synchronize system time
You can define the Connect IT time zone and specify the servers that should be used to synchronize its
time.
1.
Log in
to manage the Connect IT .
2.
Access the Configuration > System
3. Expand the Time section.
4. In the Timezone field, enter the time zone for the Connect IT's physical location. The time zone
is used to adjust the time for logged messages and to start
Digi Connect IT® 16/48 User Guide
Description
The frequency at which the modem firmware check and
update tasks will run. The default value is Daily.
Select this option to enable the modem firmware update to
be scheduled to occur within the specified maintenance
window. The system looks for all available firmware over
the air and in flash memory to see if an update is needed. If
a newer firmware version is available, the update will occur.
Select this option to enable the system to check if
configuration updates are scheduled to occur within the
specified maintenance window.
This check is in addition to the check defined in the Central
Management section.
Add a script
name.
should enter in each field, hover over the field or click the down arrow and then
Help.
screen.
Daily: The device runs the modem firmware check
n
and update once a day within the given time
window.
Weekly: The device runs the modem firmware check
n
and update any day within the given time window
only once during the week.
scheduled system
Synchronize system time
maintenance.
46
Advertisement
Table of Contents
