Setup Methods According To Din En Iso 17664; Preparation At The Site Of Use - KaVo INTRAcompact contra-angle 2068 LHC Instructions For Use Manual

Setup methods according to DIN EN ISO 17664

7 Setup methods according to DIN EN ISO 17664

7.1 Preparation at the site of use

WARNING
Hazard from non-sterile products.
There is a risk of infection from contaminated medical devices.
▶ Observe suitable personal protective measures.
▶ Remove all residual cement, composite or blood without delay.
▶ Recondition the medical device as soon as possible after treatment.
▶ Remove the cutter or grinder from the medical device.
▶ The medical device must be dry when transported for reconditioning.
▶ Do not place it in a solution or similar.
35