Functions
2.4 Command Processing
Figure 2-8
The service interlocking indications are logged in the operational log.
2.4.5
Command Logging
During the processing of the commands, independent of the further message routing and processing,
command and process feedback information are sent to the message processing center. These messages
contain information on the cause. With the corresponding allocation (configuration) these messages are
entered in the event list, thus serving as a report.
Prerequisites
A list of possible operating responses and their meaning as well as the command types required for tripping
and closing of switching devices or for raising and lowering transformer taps are described in the SIPROTEC 4
System Description.
2.4.5.1 Description
Acknowledgment of Commands to the Device Front
All indications with the source of command LOCAL are transformed into a corresponding response and shown
in the text field of the Web Monitor.
58
Service Interlocking, Example for Routing to LEDs
SIPROTEC, 6MU805, Manual
C53000-G1140-C380-5, Release date 06.2018