rip version
Syntax
rip version { 1 | 2 [ broadcast | multicast ] }
undo rip version
View
Interface view
Default level
2: System level
Parameters
1: RIP version 1.
2: RIP version 2.
broadcast: Sends RIPv2 messages in broadcast mode.
multicast: Sends RIPv2 messages in multicast mode.
Description
Use the rip version command to specify a RIP version for the interface.
Use the undo rip version command to remove the specified RIP version.
By default, no RIP version is configured for an interface, which uses the global RIP version. If the global
RIP version is not configured, the interface can only send RIPv1 broadcasts and can receive RIPv1
broadcasts and unicasts, and RIPv2 broadcasts, multicasts and unicasts.
If RIPv2 is specified with no sending mode configured, RIPv2 messages will be sent in multicast mode.
When RIPv1 runs on an interface, the interface can perform the following operations:
Sends RIPv1 broadcast messages
•
•
Receives RIPv1 broadcast messages
Receives RIPv1 unicast messages
•
When RIPv2 runs on the interface in broadcast mode, the interface can perform the following operations:
Sends RIPv2 broadcast messages
•
Receives RIPv1 broadcast messages
•
Receives RIPv1 unicast messages
•
Receives RIPv2 broadcast messages
•
•
Receives RIPv2 multicast messages
Receives RIPv2 unicast messages
•
When RIPv2 runs on the interface in multicast mode, the interface can perform the following operations:
Sends RIPv2 multicast messages
•
Receives RIPv2 broadcast messages
•
Receives RIPv2 multicast messages
•
Receives RIPv2 unicast messages
•
57