Display Ospf Peer - H3C S5820X Series Command Reference Manual

View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ospf nexthop command to display OSPF next hop information.
If no OSPF process is specified, the next hop information of all OSPF processes is displayed.
Examples
# Display OSPF next hop information.
<Sysname> display ospf nexthop
OSPF Process 1 with Router ID 192.168.0.1
Next Hops:
Address
----------------------------------------------------------------
192.168.0.1
192.168.0.2
192.168.1.1
Table 20 Output description
Field
Next Hops
Address
Refcount
IntfAddr
Intf Name

display ospf peer

Syntax
display ospf [ process-id ] peer [ verbose ] [ interface-type interface-number ] [ neighbor-id ] [ | { begin
| exclude | include } regular-expression ]
Routing Nexthop Information
Refcount IntfAddr
1 192.168.0.1
1 192.168.0.1
1 192.168.1.1
Description
Information about Next hops
Next hop address
Reference count (routes that reference the next hop)
Outbound interface address
Outbound interface name
Intf Name
Vlan-interface1
Vlan-interface1
Vlan-interface2
83