Display Ipv6 Routing-Table - H3C S5820X Series Command Reference Manual

Table 3 Output description
Field
Proto
route
active
added
deleted
freed
Total

display ipv6 routing-table

Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ipv6 routing-table command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes—the brief information about the current optimal routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destinations : 1
Description
Origin of the routes.
Number of routes from the origin
Number of active routes from the origin
Number of routes added into the routing table since the router started up or the routing
table was last cleared
Number of routes marked as deleted, which will be freed after a period.
Number of routes that got freed (removed permanently)
Total number
Routes : 1
14