Ip Routing Basics Configuration Commands; Display Ip Routing-Table - H3C S5820X Series Command Reference Manual

IP routing basics configuration commands

NOTE:
The term
•
The interfaces in routing refer to Layer 3 interfaces, including VLAN interfaces and Layer 3 Ethernet
•
interfaces. Layer 3 Ethernet interfaces refer to Ethernet interfaces operating in route mode. For more
information about the operating mode of the Ethernet interface, see the
Configuration Guide.

display ip routing-table

Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters.
verbose: Displays detailed routing table information, including that for inactive routes. With this keyword
absent, the command displays only brief information about active routes.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ip routing-table command to display brief information about active routes in the routing
table.
This command displays brief information about a routing table, with a routing entry contained in one line.
The information displayed includes destination IP address/mask length, protocol, priority, cost, next hop
and outbound interface. This command displays only the optimal routes in use.
Use the display ip routing-table verbose command to display detailed information about all routes in the
routing table.
router
in this document refers to both routers and Layer 3 switches.
1
Layer 2—LAN Switching