H3C S5820X Series Quick Start Manual
Hide thumbs
Also See for S5820X Series:
- Command reference manual (488 pages) ,
- Configuration manual (252 pages) ,
- High availability configuration manual (233 pages)
Related Manuals for H3C S5820X Series
Summary of Contents for H3C S5820X Series
-
Page 1: Quick Start
H3C S5820X Series Ethernet Switches Quick Start Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6PW108-20140516... - Page 2 Copyright © 2009-2014, Hangzhou H3C Technologies Co., Ltd. and its licensors All rights reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd. Trademarks H3C,...
- Page 3 Preface H3C S5820X Series Ethernet Switches Quick Start describes the installation of the H3C S5820X series Ethernet switches. This preface includes: Audience • Conventions • Obtaining documentation • Technical support • Documentation feedback • Audience This documentation is intended for: Network planners •...
-
Page 4: Obtaining Documentation
Convention Description An alert that provides helpful information. Obtaining documentation Access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com. Click the links on the top navigation bar to obtain different categories of product documentation: [Technical Support & Documents > Technical Documents]—Provides... -
Page 5: Table Of Contents
Contents Overview ··········································································································· 1 About this guide ······························································································· 1 Product overview ······························································································ 1 Installation preparations ··················································································· 2 Installation site ·································································································· 2 Installation tools ································································································ 2 Installing the switch ··························································································· 3 Installation flow ································································································ 3 ... -
Page 6: Overview
The H3C S5820X Switch Series includes the following models: S5820X-28S • S5820X-28C • S5820X-26S • NOTE: The H3C S5820X Switch Series models and installation procedures might be updated without prior notice. For the latest quick start guide, go to http://www.h3c.com. -
Page 7: Installation Preparations
To ensure correct operation and long service life of your switch, install it in an environment that meets the temperature, humidity, and electromagnetic shield (EMS) requirements. For more information, see H3C S5820X Switch Series Installation Guide. Installation tools The installation tools are not provided with the switch. -
Page 8: Installing The Switch
Installing the switch Installation flow Figure 2 Installation flow NOTE: The S5820X-28C switch supports hot-swapping of interface cards and OAP cards. You can install or remove an interface card or an OAP card when the switch is operating. For more information, see "Installing an interface card"... -
Page 9: Installing The Switch In A Rack
Installing the switch in a rack Attaching an ESD wrist strap Before installation, wear an ESD strap, and make sure one end of the wrist strap has a good skin contact and the other end is attached to a post of the correctly-grounded rack, as shown in Figure Figure 3 Attaching an ESD wrist strap... -
Page 10: Mounting Positions
Figure 4 Mounting brackets (1) 1 U mounting brackets (2) 2 U mounting brackets and cable management brackets In addition to a pair of mounting brackets, the S5820X-26S switch also comes with a pair of chassis rails and a pair of slide rails. Figure 5 Chassis rail and slide rail (1) Chassis rail (2) Slide rail... - Page 11 Figure 6 Mounting positions on an S5820X-28S switch (1) Front mounting position (2) Mid-mounting position (3) Rear mounting position The S5820X-26S switch provides two mounting positions: one front mounting position (near the network ports) and one rear mounting position (near the power modules), as shown in Figure Figure 7 Mounting positions on an S5820X-26S switch...
-
Page 12: Installing An S5820X-26S Switch In A 19-Inch Rack
Installing an S5820X-26S switch in a 19-inch rack Table 1 Installing an S5820X-26S switch in a 19-inch rack Installation procedure Remarks Installation diagram • For mounting near the power Attach the mounting modules, see Figure brackets to the Required • For mounting near the ports, switch. - Page 13 Figure 8 Installing the mounting brackets near the power modules and installing the chassis rails Figure 9 Installing the mounting brackets near the ports and installing the chassis rails Figure 10 Installing cage nuts in a rack post...
- Page 14 Figure 11 Attaching slide rails to the rack Figure 12 Connecting the grounding cable to the primary grounding point (1) Grounding sign (2) Grounding cable...
-
Page 15: Installing An S5820X-28C Switch In A 19-Inch Rack
Figure 13 Installing the switch in the rack (mounting brackets near the power modules) Installing an S5820X-28C switch in a 19-inch rack Table 2 Installing an S5820X-28C switch in a 19-inch rack Installation procedure Remarks Installation diagram Separate the mounting brackets from cable Optional Figure... - Page 16 NOTE: Before you install the mounting brackets in the mid-mounting position, separate the mounting brackets from the cable management bracket. Figure 14 Attaching mounting brackets to the S5820X-28C switch (1) Separate the mounting bracket from the cable management bracket (2) Install mounting brackets near the ports (3) Install mounting brackets in the mid-mounting position (4) Install mounting brackets near the power modules...
-
Page 17: Installing An S5820X-28S Switch In A 19-Inch Rack
Figure 15 Installing the switch in the rack Installing an S5820X-28S switch in a 19-inch rack Table 3 Installing an S5820X-28S switch in a 19-inch rack Installation procedure Remarks Installation diagram Attach the mounting brackets to the Required Figure switch. Install cage nuts in the rack posts. -
Page 18: Mounting The Switch On A Workbench
Figure 17 Installing the switch in the rack Mounting the switch on a workbench CAUTION: Ensure 10 cm (3.94 in) of clearance around the switch. • Do not place heavy objects on the switch. • If a standard 19-inch rack is not available, you can place you switch on a workbench. -
Page 19: Connecting The Grounding Cable
Connecting the grounding cable for an S5820X-26S switch The S5820X-26S switch has three grounding points, as shown in Figure H3C recommends that you use the primary grounding point. Figure 19 Grounding points of the S5820X-26S switch (1) Auxiliary grounding point 2 (2) Primary grounding point... -
Page 20: Switch
Connect one end of the grounding cable to the grounding point on the switch. See Figure Attach the other end (ring terminal) of the grounding cable to a grounding post on the grounding strip, and secure the grounding cable to the grounding post by using a hex nut. Figure 20 Connecting the grounding cable Connecting the grounding cable for an S5820X-28C or S5820X-28S switch... - Page 21 Figure 21 Connecting one end of the grounding cable to the S5820X-28S switch To connect the other end of the grounding cable to a grounding strip: Cut the grounding cable to a length according to the distance between the switch and the grounding strip. Peel 5 mm (0.20 in) of insulation sheath from the end, and then insert the naked metal part through the black insulation covering into the end of the ring terminal.
-
Page 22: Installing Fan Trays
The switch supports hot-swappable fan trays. Table 4 lists the fan trays available for the switch. For more information about the fan trays, see H3C LSW1FAN & LSW1BFAN Installation Manual and H3C LSWM1FANSC & LSWM1FANSCB Installation Guide. Table 4 Installing fan trays... -
Page 23: Installing Power Modules
Figure 24 Installing an LSW1FAN fan tray Figure 25 Installing an LSWM1FANSC fan tray Installing power modules CAUTION: For an S5820X-28C switch, do not remove the filler modules in the • power module slots. Before you install a PSR300-12A, PSR300-12A1, PSR300-12A2, PSR300-12D1, or PSR300-12D2 power module on an S5820X-28C switch, make sure the filler module has been installed. - Page 24 Table 5 lists the power modules available for these switches. For more information about the power modules, see H3C PSR300- 1 2A & PSR300- 1 2D Series Power Modules User Manual, H3C LSVM1AC650 & LSVM1DC650 Power Modules User Manual, and H3C LSVM1AC300 & LSVM1DC300 Power Modules User Manual.
- Page 25 Figure 27 Installing an LSVM1AC650 power module If only one power module is installed, install the filler panel into another power module slot. Figure 28 uses the S5820X-26S switch as an example. Figure 28 Installing the filler panel on an S5820X-26S switch Before you remove a power module, remove the power cord from the power module.
-
Page 26: Connecting The Power Cord
Figure 29 Removing an LSVM1AC650 power module Connecting the power cord CAUTION: Connect the power cord after you install the power module in the switch. • Make sure the power module switch is turned off when you connect the • power cord. - Page 27 Power module Standard Power cord connection model configuration procedures • PSR300- 1 2D1 Connect the DC power cord, as DC power cord • shown in Figure PSR300- 1 2D2 Connect the AC power cord, and use AC power • • LSVM1AC650 the cable tie to secure the power cord cord...
- Page 28 Figure 32 Connecting an AC power cord Figure 33 Connecting the DC power cord to a PSR300-12D1 power module...
- Page 29 Figure 34 Connecting the AC power cord to an LSVM1AC650/LSVM1AC300 power module (1) Cable tie (2) AC power cord (3) Power module handle Figure 35 Connecting the DC power cord to an LSVM1DC650/LSVM1DC300 power module The DC power cord connector for an LSVM1DC650/LSVM1DC300 power module has tabs.
-
Page 30: Installing An Interface Card
You can install one or two interface cards as needed. For the interface cards available for the S5820X-28C switch, see H3C S5820X Switch Series Installation Guide. For more information about interface cards, see H3C S5820X &... -
Page 31: Installing An Oap Card
OAP card slot. You can install an OAP card as needed. For the OAP cards available for the S5820X-28C switch, see H3C S5820X Switch Series Installation Guide. For more information about OAP cards, see H3C OAP Cards User Manual. - Page 32 Figure 39 Removing the filler panel from an OAP card slot Figure 40 Installing an OAP card...
Need help?
Do you have a question about the S5820X Series and is the answer not in the manual?
Questions and answers