H3C S5820X Series Command Reference Manual page 388

Field
Optional capabilities
Route refresh capability has been
enabled
ORF advertise capability based on
prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value
IPsec policy name: policy001, SPI: 300
BFD
# Display the log information of the IPv6 peer 20::21.
<sysname> display bgp ipv6 peer 20::21 log-info
Peer : 20::21
Date Time
10-Jul-2008 15:46:17 Down
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down
Table 87 Output description
Field Description
Peer IPv6 address of the peer
Date Date on which the Notification was sent or received
Time Time at which the Notification was sent or received
BGP session state, which can be:
•
State
•
Notification Notification message
Description
Optional capabilities enabled on the peer:
Route-refresh is enabled;
The IPv6 BGP peer supports the ORF capability based on IP prefix.
The capability value is 64.
•
The local IPv6 BGP router supports both the ORF sending and
receiving capabilities.
•
Negotiation result: The local IPv6 BGP router can send
Router-refresh messages carrying the ORF information, and the
peer can receive Router-refresh messages carrying the ORF
information. (If receive is displayed, the local BGP router can
receive Router-refresh messages carrying the ORF information,
and the peer can send Router-refresh messages carrying the ORF
information. This field is not displayed if neither the send nor the
receive capability is supported.
Preferred value assigned to routes received from the peer
IPsec policy applied to the peer and SPI of the IPsec policy
Indicates whether BFD is enabled over the link to the IPv6 BGP peer.
State Notification
Error/SubError
Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
Send Notification with Error 6/4
Administrative Reset
Up: Indicates the BGP session is up.
Down: Indicates the BGP session is down.
370