Ospfv3 Bfd Enable; Ospfv3 Cost - H3C S5820X Series Command Reference Manual

Description
Use the ospfv3 area command to enable an OSPFv3 process on the interface and specify the area for
the interface.
Use the undo ospfv3 area command to disable an OSPFv3 process.
OSPFv3 is not enabled on an interface by default.
Examples
# Enable OSPFv3 process 1 on an interface that belongs to instance 1 and specify area 1 for the
interface.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 1 area 1 instance 1

ospfv3 bfd enable

Syntax
ospfv3 bfd enable [ instance instance-id ]
undo ospfv3 bfd enable [ instance instance-id ]
View
Interface view
Default level
2: System level
Parameters
instance-id: Instance ID of the interface. It ranges from 0 to 255 and defaults to 0.
Description
Use the ospfv3 bfd enable command to enable BFD for link failure detection on an OSPFv3 interface.
Use the undo ospfv3 bfd enable command to disable BFD on the OSPFv3 interface.
By default, the OSPFv3 interface is not enabled with BFD.
Examples
# Enable BFD on VLAN-interface 1 1 in instance 1.
<Sysname> system-view
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] ospfv3 bfd enable instance 1

ospfv3 cost

Syntax
ospfv3 cost value [ instance instance-id ]
undo ospfv3 cost [ value ] [ instance instance-id ]
View
Interface view
329