Display Ipv6 Routing-Table Ipv6-Prefix - H3C S5820X Series Command Reference Manual

Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
ipv6-address1/ipv6-address2: An IPv6 address range from IPv6 address1 to IPv6 address2.
prefix-length1/prefix-length2: Prefix length, in the range 0 to 128.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ipv6 routing-table ipv6-address1 ipv6-address2 command to display routes with
destinations falling into the specified IPv6 address range.
Examples
# Display routes with destinations falling into the IPv6 address range.
<Sysname> display ipv6 routing-table 100:: 64 300:: 64
Routing Table :
Summary Count : 3
Destination: 100::/64
NextHop
Interface
Destination: 200::/64
NextHop
Interface
Destination: 300::/64
NextHop
Interface
See Table 2

display ipv6 routing-table ipv6-prefix

Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-prefix ipv6-prefix-name [ verbose ]
[ | { begin | exclude | include } regular-expression ]
: ::
: NULL0
: ::
: NULL0
: ::
: NULL0
for description of the output.
18
Protocol : Static
Preference: 60
Cost : 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Static
Preference: 60
Cost : 0