Display Ripng Database - H3C S5820X Series Command Reference Manual

Examples
# Display the running status and configuration information of all configured RIPng processes.
<Sysname> display ripng
Public VPN-instance name :
RIPng process : 1
Preference : 100
Checkzero : Enabled
Default Cost : 0
Maximum number of balanced paths : 8
Update time
Suppress time :
Number of periodic updates sent : 0
Number of trigger updates sent : 0
IPsec policy name: policy001, SPI: 300
Table 54 Output description
Field
Public VPN-instance name
RIPng process
Preference
Checkzero
Default Cost
Maximum number of balanced paths
Update time
Timeout time
Suppress time
Garbage-Collect time
Number of periodic updates sent
Number of trigger updates sent
IPsec policy name
SPI

display ripng database

Syntax
display ripng process-id database [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
: 30 sec(s) Timeout time
120 sec(s) Garbage-Collect time :
276
: 180 sec(s)
120 sec(s)
Description
Public VPN instance name
RIPng process ID
RIPng route priority
Indicates whether zero field check for RIPng packet
headers is enabled
Default metric of redistributed routes
Maximum number of load balanced routes
RIPng update interval, in seconds
RIPng timeout interval, in seconds
RIPng suppress interval, in seconds
RIPng garbage collection interval, in seconds
Number of periodic updates sent
Number of triggered updates sent
IPsec policy applied in the process
SPI defined in the IPsec policy