Display Ospfv3 Vlink - H3C S5820X Series Command Reference Manual

Type ID(If-Index)
Rtr 1.1.1.1
Rtr 2.2.2.2
Rtr 3.3.3.3
Rtr 4.4.4.4
Net 4.4.4.4(983049)
Table 77 Output description
Field
Type
ID(If-Index)
Bits
Metric
Next-Hop
Interface

display ospfv3 vlink

Syntax
display ospfv3 [ process-id ] vlink [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ospfv3 vlink command to display OSPFv3 virtual link information. If no process is
specified, virtual link information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 virtual link information.
<Sysname> display ospfv3 vlink
Virtual Link VLINK1 to router 1.1.1.1 is up
Transit area :0.0.0.1 via interface Vlan-interface20, instance ID: 0
Local address: 2000:1::1
Bits Metric
--
1
1
1
1
319
Next-Hop Interface
2.2.2.2 Vlan1
3.3.3.3 Vlan1
4.4.4.4 Vlan1
0.0.0.0 Vlan1
Description
Type of node
Router ID
Flag bit
Cost value
Next hop
Outbound interface