Filter-Policy Export (Ipv6 Address Family View/Ipv6 Bgp-Vpn Instance View) - H3C S5820X Series Command Reference Manual

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display bgp ipv6 routing-table statistic command to display IPv6 BGP routing statistics.
Examples
# Display IPv6 BGP routing statistics.
<Sysname> display bgp ipv6 routing-table statistic
Total Number of Routes: 1
filter-policy export (IPv6 address family view/IPv6 BGP-VPN
instance view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol process-id ]
undo filter-policy export [ protocol process-id ]
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
acl6-number: Specifies the number of an ACL6 used to match against the destination of routing
information. The number is in the range 2000 to 3999.
ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against the destination of
routing information. The name is a string of 1 to 19 characters.
protocol: Filters routes redistributed from the routing protocol. It can be direct, isisv6, ospfv3, ripng, or
static. If no protocol is specified, all routes will be filtered when advertised.
process-id: Process ID of the routing protocol, in the range 1 to 65535. It is available only when the
protocol is isisv6, ospfv3 or ripng.
Description
Use the filter-policy export command to filter outbound routes using a specified filter.
Use the undo filter-policy export command to cancel filtering outbound routes.
By default, no outbound routing information is filtered.
If a protocol is specified, only routes redistributed from the specified protocol are filtered. If no protocol
is specified, all redistributed routes will be filtered.
383