Filter-Policy Import (Rip View) - H3C S5820X Series Command Reference Manual

NOTE:
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the ACL
should be configured with the rule [
command to deny/permit a route with the specified destination, or with the rule [
permit } ip source
deny/permit a route with the specified destination and mask. The source keyword specifies the destination
address of a route and the destination keyword specifies the subnet mask of the route (the subnet mask
must be valid; otherwise, the configuration is ineffective).
Related commands: import-route and ip ip-prefix; acl (ACL and QoS Command Reference).
Examples
# Reference ACL 2000 to filter outbound routes.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] rip 1
[Sysname-rip-1] filter-policy 2000 export
# Reference IP prefix list abc to filter outbound routes on Vlan-interface 1 1.
[Sysname-rip-1] filter-policy ip-prefix abc export Vlan-interface 11
# Configure ACL 3000 to permit only route 1 13.0.0.0/16 to pass, and reference ACL 3000 to filter
outbound routes.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0
[Sysname-acl-adv-3000] rule 100 deny ip
[Sysname-acl-adv-3000] quit
[Sysname] rip 1
[Sysname-rip 1] filter-policy 3000 export

filter-policy import (RIP view)

Syntax
filter-policy { acl-number | gateway ip-prefix-name | ip-prefix ip-prefix-name [ gateway ip-prefix-name ] }
import [ interface-type interface-number ]
undo filter-policy import [ interface-type interface-number ]
View
RIP view
Default level
2: System level
Parameters
acl-number: Number of the ACL used for filtering incoming routes, in the range of 2000 to 3999.
ip-prefix ip-prefix-name: References an IP prefix list to filter incoming routes. The ip-prefix-name is a string
of 1 to 19 characters.
rule-id
sour-addr sour-wildcard
] { deny | permit } ip source
dest-addr dest-wildcard
destination
41
sour-addr sour-wildcard
rule-id
] { deny |
command to