Filter-Policy Export (Ospfv3 View) - H3C S5820X Series Command Reference Manual

Remote address: 2001:1:1::1
Transmit Delay is 1 sec, State: P-To-P,
Timer intervals configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Adjacency state :Full
IPsec policy name: policy001, SPI: 300
Table 78 Output description
Field
Virtual Link VLINK1 to router 1.1.1.1 is up
Transit area 0.0.0.1 via interface Vlan-interface20
instance ID
Local address
Remote address
Transmit Delay
State
Timer intervals configured, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Hello due in 00:00:02
Adjacency state
IPsec policy name
SPI

filter-policy export (OSPFv3 view)

Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ bgp4+ | direct | isisv6 process-id |
ospfv3 process-id | ripng process-id | static ]
undo filter-policy export [ bgp4+ | direct | isisv6 process-id | ospfv3 process-id | ripng process-id |
static ]
View
OSPFv3 view
Default level
2: System level
Parameters
acl6-number: Specifies the ACL6 number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to 19 characters.
bgp4+: Filters IPv6 BGP routes.
direct: Filters direct routes.
isisv6 process-id: Specifies to filter the routes of an IPv6 IS-IS process, which is in the range of 1 to 65535.
Description
The virtual link VLINK1 to router 1.1.1.1 is up
Interface Vlan-interface 20 in transit area 0.0.0.1.
Instance ID
Local IPv6 address
Remote IPv6 address
Transmit delay of sending LSAs
Interface state
Timer intervals in seconds, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Send hello packets in 2 seconds.
Adjacency state
IPsec policy used on the virtual link
SPI defined in the IPsec policy
320