Circuit-Cost - H3C S5820X Series Command Reference Manual
Layer 3 - ip routing
Hide thumbs
Also See for S5820X Series:
- Command reference manual (488 pages) ,
- Configuration manual (252 pages) ,
- High availability configuration manual (233 pages)
Table of Contents
Advertisement
View
IS-IS view
Default level
2: System level
Parameters
value: Bandwidth reference value in Mbps, ranging from 1 to 2147483648.
Description
Use the bandwidth-reference command to set the bandwidth reference value for automatic link cost
calculation.
Use the undo bandwidth-reference command to restore the default.
By default, the bandwidth reference value is 100 Mbps.
Related commands: auto-cost enable.
Examples
# Configure the bandwidth reference of IS-IS process 1 as 200 Mbps.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] bandwidth-reference 200
circuit-cost
Syntax
circuit-cost value [ level-1 | level-2 ]
undo circuit-cost [ level-1 | level-2 ]
View
IS-IS view
Default level
2: System level
Parameters
value: Link cost value. The value range varies with cost styles.
For styles narrow, narrow-compatible and compatible, the cost value ranges from 0 to 63.
•
•
For styles wide and wide-compatible, the cost value ranges from 0 to 16777215.
level-1: Applies the link cost to Level- 1 .
level-2: Applies the link cost to Level-2.
Description
Use the circuit-cost command to set a global IS-IS link cost.
Use the undo circuit-cost command to restore the default.
By default, no global link cost is configured.
If no level is specified, the specified cost applies to both Level- 1 and Level-2.
Related commands: isis cost, cost-style.
131
Advertisement
Table of Contents
