Reset Rip Statistics; Rip - H3C S5820X Series Command Reference Manual
Layer 3 - ip routing
Hide thumbs
Also See for S5820X Series:
- Command reference manual (488 pages) ,
- Configuration manual (252 pages) ,
- High availability configuration manual (233 pages)
Table of Contents
Advertisement
After executing the command, you are prompted whether you want to reset the RIP process.
Examples
# Reset RIP process 100.
<Sysname> reset rip 100 process
Warning : Reset RIP process? [Y/N]:Y
reset rip statistics
Syntax
reset rip process-id statistics
View
User view
Default level
2: System level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
Description
Use the reset rip statistics command to clear the statistics of the specified RIP process. This command can
clear the statistics of debugging.
Examples
# Clear statistics in RIP process 100.
<Sysname> reset rip 100 statistics
rip
Syntax
rip [ process-id ] [ vpn-instance vpn-instance-name ]
undo rip [ process-id ] [ vpn-instance vpn-instance-name ]
View
System view
Default level
2: System level
Parameters
process-id: RIP process ID, in the range of 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies a VPN instance name, a string of 1 to 31 case-sensitive
characters.
Description
Use the rip command to create a RIP process and enter RIP view.
Use the undo rip command to disable a RIP process.
By default, no RIP process runs.
48
Advertisement
Table of Contents
