Field
Default routes
Default route cost
Verify-source
Networks
Configured peers
Triggered updates sent
Number of routes changes
Number of replies to queries
display rip database
Syntax
display rip process-id database [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display rip database command to display active routes in the database of the specified RIP
process, which are sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
10.0.0.0/8, cost 1, ClassfulSumm
10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface
Description
Indicates whether a default route is sent to RIP
neighbors
•
only means only a default route is advertised.
•
originate means a default route is advertised
along with other routes.
•
disable means no default route is advertised.
Cost of the default route
Indicates whether the source IP address is checked on
the received RIP routing updates
Networks enabled with RIP
Configured neighbors
Number of sent triggered updates
Number of changed routes in the database
Number of RIP responses
35