Default; Default-Cost (Ospf Area View) - H3C S5820X Series Command Reference Manual

[Sysname] ospf 100
[Sysname-ospf-100] bandwidth-reference 1000

default

Syntax
default { cost cost | limit limit | tag tag | type type } *
undo default { cost | limit | tag | type } *
View
OSPF view
Default level
2: System level
Parameters
cost: Specifies the default cost for redistributed routes, in the range 0 to 16777214.
limit: Specifies the default upper limit of routes redistributed per time, in the range 1 to 2147483647.
tag: Specifies the default tag for redistributed routes, in the range 0 to 4294967295.
type: Specifies the default type for redistributed routes: 1 or 2.
Description
Use the default command to configure default parameters for redistributed routes.
Use the undo default command to restore default values.
The cost, route type, tag, and the upper limit are 1, 2, 1 and 1000 by default.
Related commands: import-route.
Examples
# Configure the default cost, upper limit, tag and type as 10, 20000, 100 and 2 respectively for
redistributed external routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default cost 10 limit 20000 tag 100 type 2

default-cost (OSPF area view)

Syntax
default-cost cost
undo default-cost
View
OSPF area view
Default level
2: System level
66