Display Ip Policy-Based-Route - H3C S5820X Series Command Reference Manual

value: Sets the preference value for IP packets. Eight preferences (0 to 7) are available. Each preference
corresponds to a keyword.
Table 98 IP preferences and keywords
Preference
0
1
2
3
4
5
6
7
Description
Use the apply ip-precedence command to set a preference for packets.
Use the undo apply ip-precedence command to remove the configuration.
Related commands: apply ip-address next-hop and apply ip-address default next-hop.
Examples
# Set the preference to 5 (critical) for packets.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] apply ip-precedence critical

display ip policy-based-route

Syntax
display ip policy-based-route [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Keyword
routine
priority
immediate
flash
flash-override
critical
internet
network
456