Log-Peer-Change; Network (Bgp/Bgp-Vpn Instance View) - H3C S5820X Series Command Reference Manual

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] import-route rip

log-peer-change

Syntax
log-peer-change
undo log-peer-change
View
BGP view
Default level
2: System level
Parameters
None
Description
Use the log-peer-change command to enable the global BGP logging on peers going up and down.
Use the undo log-peer-change command to disable the function.
By default, the function is enabled.
Examples
# Enable BGP logging on peers going up and down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] log-peer-change

network (BGP/BGP-VPN instance view)

Syntax
network ip-address [ mask | mask-length ] route-policy route-policy-name
undo network ip-address [ mask | mask-length ]
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
ip-address: Destination IP address.
mask: Mask of the network address, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
route-policy-name: Routing policy applied to the route. The name is a string of 1 to 63 characters.
234