Import-Route (Ospfv3 View) - H3C S5820X Series Command Reference Manual

Description
Use the graceful-restart interval command to configure the GR restart interval.
Use the undo graceful-restart interval command to restore the default.
By default, the GR restart interval is 120 seconds.
The value of the GR restart interval cannot be smaller than the maximum OSPFv3 neighbor dead time of
all the OSPFv3 interfaces; otherwise, GR restart may fail.
Related commands: ospfv3 timer dead
Examples
# Configure the GR restart interval for OSPFv3 process 1 as 100 seconds.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] graceful-restart interval 100

import-route (OSPFv3 view)

Syntax
import-route protocol [ process-id | allow-ibgp ] [ cost value | route-policy route-policy-name | type
type ] *
undo import-route protocol [ process-id ]
View
OSPFv3 view
Default level
2: System level
Parameters
protocol: Redistributes routes from a specified routing protocol, which can be bgp4+, direct, isisv6, ospf
v3, ripng, or static.
process-id: Process ID of the routing protocol, in the range 1 to 65536. It defaults to 1. This argument
takes effect only when the protocol is isisv6, ospfv3, or ripng.
allow-ibgp: Allows redistributing iBGP routes. This keyword takes effect only the protocol is bgp4+.
cost value: Specifies a cost for redistributed routes, ranging from 1 to 16777214. The default is 1.
route-policy route-policy-name: Redistributes only the routes that match the specified routing policy.
route-policy-name is a string of 1 to 63 characters.
type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.
CAUTION:
Using the import-route bgp4+ command redistributes only eBGP routes, and using the import-route
bgp4+ allow-ibgp command redistributes both eBGP and iBGP routes.
Description
Use the import-route command to redistribute routes.
Use the undo import-route command to disable routes redistribution.
325