Bgp Configuration Commands; Aggregate - H3C S5820X Series Command Reference Manual

BGP configuration commands

NOTE:
The term
•
For more information about routing policy configuration commands in this document, see the chapter
•
"Routing policy configuration commands."

aggregate

Syntax
aggregate ip-address { mask | mask-length } [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ip-address { mask | mask-length }
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
ip-address: Summary address.
mask: Summary route mask, in dotted decimal notation.
mask-length: Length of summary route mask, in the range 0 to 32.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the routing
policy The routing policy name is a string of 1 to 63 characters.
detail-suppressed: Only advertises the summary route.
suppress-policy route-policy-name: Suppresses specific routes defined in the routing policy. The routing
policy name is a string of 1 to 63 characters.
origin-policy route-policy-name: References the routing policy to specify routes for summarization. The
routing policy name is a string of 1 to 63 characters.
router
in this document refers to both routers and Layer 3 switches.
194