Display Ipv6 Routing-Table; Display Ipv6 Routing-Table Ipv6-Address - H3C S5120-EI Series Command Reference Manual

display ipv6 routing-table

Syntax
display ipv6 routing-table
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 routing-table command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes, namely, the brief information about the current optimal
routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destinations : 1
Destination : ::1/128
NextHop : ::1
Interface : InLoop0
Table 1-4 display ipv6 routing-table command output description
Field
Destination
NextHop
Preference
Interface
Protocol
Cost

display ipv6 routing-table ipv6-address

Syntax
display ipv6 routing-table ipv6-address prefix-length [ longer-match ] [ verbose ]
Routes : 1
Protocol
Preference
Cost
IPv6 address of the destination network/host
Nexthop address
Route priority
Outbound interface
Routing protocol
Route cost
1-9
: Direct
: 0
: 0
Description