Log-Peer-Change - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Examples
# In BGP view, redistribute routes from RIP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] import-route rip
# In BGP-VPN instance view, redistribute routes from RIP (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] import-route rip

1.1.38 log-peer-change

Syntax
log-peer-change
undo log-peer-change
View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the log-peer-change command to enable the global BGP logging on peers going
up and down.
Use the undo log-peer-change command to disable the function.
By default, the function is enabled.
Examples
# Enable BGP logging on peers going up and down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] log-peer-change
Chapter 1 BGP Configuration Commands
1-40