Attaching Power Supply Unit; Attaching Weather Shield - Vaisala Optimus OPT100 Installation Manual

OPT100 Installation Guide
To verify that the oil connections are tight, check for leaks during commissioning
when the DGA monitor is pumping oil. Ideally, check the connections again after
the DGA monitor has been running for some time (for example, the next day).
3.5 Attaching Power Supply Unit
• 6 mm hex key
1. If the Ground Mounting Set is used:
a. Attach the power supply unit to the middle of the mounting stand.
2. If the Wall Mounting Set is used:
a. Attach the power supply unit to the cradle.
b. Support the power supply unit and cradle and attach them to the bottom of the
OPT100 enclosure.
3.6 Attaching Weather Shield
• Weather Shield (Vaisala item OPTSHLD1)
• Weather shield (delivered in three parts)
• Screws and washers
26
M211857EN-F