Changing Administrator Password; Figure 19 Changing Administrator Password - Vaisala Optimus OPT100 Installation Manual

2. Open a web browser on the computer, and enter the IP address of the DGA monitor in the
address bar:
• If you are connecting locally through the ETH1 port, use the following IP address:
192.168.28.2
• If you are connecting through the network meant for SCADA integration, use the IP
address that has been assigned to the DGA monitor.
3. Your web browser may warn you that your connection is not secure. This is expected and
happens when the user interface of the DGA monitor is secured using a certificate that is
not trusted by your browser. Since the user interface is secured using a self-signed
certificate by default, this will always happen for new devices. If you know that user
interface security has not been configured to use a trusted certificate, continue regardless
of the warning. HTTPS traffic is always encrypted even if the certificate is not trusted.
4. Select Admin as the user name.
5. Enter the unique administration password for this DGA Monitor. The password is included
in the delivery documentation.
6. Select Log in. The user interface opens in your browser.
5.3 Changing Administrator Password
CAUTION!
Vaisala Support to reset it for you.
Figure 19 Changing Administrator Password
If you forget your administrator password, you need to contact
Chapter 5 – Commissioning
47