Setting Date And Time; Figure 23 Date And Time Settings Page - Vaisala Optimus OPT100 Installation Manual

1. In the user interface, select Settings > General.
2. Enter a name for the device in the Name field. Maximum length is 64 characters. You can
use alphanumerical characters, space, hyphen "-", and underscore "_".
3. Select Apply to save the name.
5.7 Setting Date and Time
CAUTION!
time clock (RTC) is stopped to allow for storage without draining the RTC back-
up battery. Set the date and time when starting the commissioning.
Figure 23 Date and Time Settings Page
DGA monitor uses UTC (Coordinated Universal Time) internally. Time and time
stamps in the user interface are shown according to the time zone of the
connecting web browser.
1. Verify the current time zone of the computer you are connected with.
2. In the user interface, select Settings > General.
When the DGA monitor is shipped from the Vaisala factory, its real-
Chapter 5 – Commissioning
51