YASKAWA GPD 515/G5 Modbus RTU Technical Manual page 45

Drive Parameter Registers (U2-XX / Fault Trace and U3-XX / Fault History)
REGISTER PARAMETER
(in hex)
080h U2-01
081h U2-02
082h U2-03
083h U2-04
084h U2-05
085h U2-06
086h U2-07
087h U2-08
088h U2-09
089h U2-10
08Ah U2-11
08Bh U2-12
Notes (for this page only):
1. List of Drive Error Codes can be found in Chapter 8, Error Codes and Troubleshooting.
7-9
PARAMETER
FUNCTION
Current Fault
Last Fault
Frequency Ref. at Fault
Output Frequency at Fault
Output Current at Fault
Motor Speed at Fault
Output Voltage at Fault
DC Bus Voltage at Fault
Output kWatts at Fault
Torque Reference at Fault
Input Terminal Status at Fault
Output Terminal Status at Fault
PARAMETER BIT
SETTING NO.
Code of current fault (1)
Code of second to current fault (1)
Frequency Reference at the time of the current fault (0.0 to 400.0 Hz)
Output Frequency at the time of current fault (0.0 to 400.0 Hz)
Output Current at the time of current fault (drive rating /8192)
Motor Speed at the time of current fault (in 0.1 Hz)
Output Voltage at the time of current fault (in 0.1 V)
Output Voltage at the time of current fault (in 1 V)
Output Power at the time of current fault (in 0.1 kW)
Torque Reference at the time of current fault (in 0.1%)
0
1
2
3
4
5
6
7
0 Control Circuit terminals 9 & 10: ìClosedî
1 Control Circuit terminals 25 & 27: ìClosedî
2 Control Circuit terminals 26 & 27: ìClosedî
3-6
7 Control Circuit terminals 18 & 20: ìClosedî
Registers
LIMITS / DESCRIPTION
Input Terminal 1 closed at time of fault
Input Terminal 2 closed at time of fault
Input Terminal 3 closed at time of fault
Input Terminal 4 closed at time of fault
Input Terminal 5 closed at time of fault
Input Terminal 6 closed at time of fault
Input Terminal 7 closed at time of fault
Input Terminal 8 closed at time of fault
not used