YASKAWA GPD 515/G5 Modbus RTU Technical Manual page 46

Drive Parameter Registers (U2-XX / Fault Trace and U3-XX / Fault History) (continued)
REGISTER PARAMETER
(in hex)
08Ch U2-13
08Dh U2-14
090h U3-01
091h U3-02
092h U3-03
093h U3-04
094h U3-05
095h U3-06
096h U3-07
097h U3-08
Notes (for this page only):
1. List of Drive Error Codes can be found in Chapter 8, Error Codes and Troubleshooting.
7-10
PARAMETER
FUNCTION
Drive Status at Fault
Elapsed Time at Fault
Last Fault
Fault Message 2
Fault Message 3
Fault Message 4
Elapsed Time 1
Elapsed Time 2
Elapsed Time 3
Elapsed Time 4
Registers
PARAMETER BIT
SETTING NO.
0
1
2 Reverse Running at the time of fault
3 Reset Signal Input at the time of fault
4
5 Drive Operation Ready at the time of fault
6
7
Elapsed Time at the time of fault (in hrs.)
Code of the most recent fault (1)
Code of the second to most recent fault (1)
Code of the third to most recent fault (1)
Code of the fourth to most recent fault (1)
Elapsed Time at the most recent fault occurrence
Elapsed Time at the second to most recent fault occurrence
Elapsed Time at the third to most recent fault occurrence
Elapsed Time at the fourth to most recent fault occurrence
LIMITS / DESCRIPTION
Running at the time of fault
Zero-Speed at the time of fault
Speed Agree at the time of fault
Minor Fault
Major Fault