YASKAWA GPD 515/G5 Modbus RTU Technical Manual page 60

Drive Parameter Registers (Read/Write) (continued)
REGISTER PARAMETER
(in hex)
48Dh L3-06
48E-48Fh
490h L4-01
491h L4-02
492h L4-03
493h L4-04
494h L4-05
495h L5-01
496h L5-02
497h L5-03
498h L6-01
499h L6-02
49Ah L6-03
49Bh L6-04
7-24
PARAMETER
FUNCTION
Stall Prevention Level during Running
Reserved
Speed Coincidence Frequency
Speed Coincidence Width
Speed Coincidence Frequency (+/-)
Speed Coincidence Width (+/-)
Frequency Reference Loss
Detection
Number of Auto Restart Attempts
Auto Restart Operation Selection
Fault Restart Time
Torque Detection Selection 1
Torque Detection Level 1
Torque Detection Time 1
Torque Detection Selection 2
PARAMETER LIMITS / DESCRIPTION
SETTING
30 to 200%
0.0 to 400.0 Hz
0.0 to 20.0 Hz
-400.0 to +400.0 Hz
0.0 to 20.0 Hz
0
1 Run at 80% of Frequency Reference
0 to 10
0 No Fault Relay
1 Fault Relay Active
0.5 to 180.0 seconds
0
1 Detected during Speed Agree
(operation continues)
2 Detected during Running (operation
3 Detected during Speed Agree (drive
4 Detected during Running (drive faults)
0 to 300%
0.0 to 10.0 seconds
0
1 Detected during Speed Agree
(operation continues)
2 Detected during Running (operation
3 Detected during Speed Agree (drive
4 Detected during Running (drive faults)
Registers
INITIAL
VALUE
Stop
Disabled
continues)
faults)
Disabled
continues)
faults)
160
0.0
2.0
0.0
2.0
0
0
0
10.0
0
150
0.1
0