Web Browser Programming - Fermax NEO MEET Installer Manual

WEB BROWSER PROGRAMMING

For complete programming of the MEET monitor, access is required through a PC via a
web browser.
The PC must be connected to the same LAN as the monitor and configured with an IP
address in the same range.
The MEET monitors' default IP address is 10.1.1.1. However, this address can also be
changed or consulted via the local programming of the monitor. See section 4.2 Basic
configuration of the MONITOR.
Type the IP address of the monitor in the address bar of the browser.
An identification form will appear.
The default identification data are:
• Username: admin
• Password: 6666
A form will appear with the different programming sections:
NOTES:
Preferably use the Chrome browser
The default identification data may have been changed from the local programming of
the monitor.
SECCIONES DE
PROGRAMACIÓN
NEO MEET INSTALLER MANUA
15