Table of Contents
Advertisement
h) Emphasis
50/15μs digital emphasis (Auto detection)
i) Frequency response
20Hz~20kHz±1dB
j) S/N ratio
More than 80dB
k) Dynamic range
More than 80dB
l) Crosstalk
More than 60dB (1kHz, Max. Output)
m)Harmonic distortion
Less than 0.1% (Rated output)
(8) Embedded AES/EBU audio output
(when the optional EA-240D are mounted)
* Digital audio level: 0dBFs=full bit in full scale
a) Output terminal:
BNC (Paired channel) 4 lines
b)Output standards
AES/EBU standards (for monitor)
c) Output impedance
75
(9)Embedded audio level meter
(supported as standard)
a) Display method
Superimposition on screen
b) Display channel
8 ch
c) Display position
3 types
d) Display mode
6 modes
e) Display segment
26 segments (including - )
f) Segment point
- , -60, -54, -48, -44, -40, -38, -36, -34, -32,
-30, -28, -26, -24, -22, -20, -18, -16, -14, -12,
-10, -8, -6, -4, -2, 0dB
g) Display color
- to -22 dB: Green
-20 to 0 dB: Amber
h) Peak hold
About 1 sec
i) Release time
About 0.4 sec
(10) Analog audio input
(supported as standard)
a) Input terminal
RCA 2 line
b) Input level
316mVp-p (-10dBV)
(11) Speaker output (supported as standard)
a) 2-channel output
1 W + 1 W or more (at the distortion factor
of 1.5%)
b) Input signal source
Analog audio input or embedded audio input
can be outputted. A signal to be outputted is
set on MENU.
* With the headphones being connected, no
sound is heard from the speakers.
(12) Headphones output
(supported as standard)
a)2ch output (3.5 mm dia. stereo mini-jack type)
85 mW/ch (RL: 32 ohms, distortion factor: 1%)
b)Input signal source
Analog audio signal or embedded audio
signal can be outputted.
To select one of these signals, make the
settting on MENU.
7-3. Specifications for liquid crystal
display (LCD) module
(1)Number of pixels
1920 (H) x 1080 (V) dots
(2)Pixel pitch
0.36375mm (W) x 0.36375mm (H)
(3)Screen size (display area)
698.4mm x 392.85mm
(Diagonal 801.31cm, 32 V inch type)
(4)Screen brightness (brightness
performance of LCD unit)
500 cd/m
2
(at full white input)
(5)Drive system
a-Si TFT active matrix, line sequential
(non-interlace)
(6)Pixel arrangement
RGB vertical stripe
(7)Response speed
Approx. 6 ms typ. (Gray to Gray)
* 25°C
(8)Contrast ratio
1300:1 (typ.)
- 45 -
Advertisement
Table of Contents
