List Of Components; Site Requirements; Environmental Specifications; Ir Remote Keypad - Christie M Series Service Manual

List of components

Ensure the following components were received with the projector:
• Infrared remote (includes two, 1.5V AA batteries and a communication cable for wired
applications)
• Line cord
• Two M6 x 10 mm lens mount security screws
• One 5 mm lens mount security Allen key
• Warranty card
• Web registration form

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Environmental specifications

Learn the environmental specifications for the projector.
Operating temperature range
Storage temperature range
Humidity range
Operating altitude

IR remote keypad

The IR remote keypad controls the projector by way of wireless communications from a battery-
powered infrared (IR) transmitter.
To use the IR remote, direct the keypad toward the projector's front or rear IR sensor and press a
function key. One of the two IR sensors on the projector detect the signal and relay the commands for
internal processing. The remote also offers a connector for wired connections to the projector.
M Series Service Guide
020-100551-11 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
5 to 40ºC (41 to 104ºF)
-40 to 70ºC (-40 to 158ºF)
10% to 80%, non condensing
10,000 ft. maximum
Introduction
8