Christie M Series Service Manual page 71

also located on the rear optical housing and measures the intensity of the light. Inside, one lens and
one mirror fold the light (fold mirror).
Estimated replacement time: 52 minutes
Dynamic iris and yellow notch filter are only applicable on 200W and 350W models.
A Light sensor module
B Dynamic iris (200W and 350W only)
C Yellow notch filter (200W and 350 only)
1. Remove the top cover (on page 45).
2. Remove the card cage lid (on page 59).
3. Remove the bridge (on page 60).
4. Remove the optical assembly (on page 78).
5. Remove the dynamic iris assembly (on page 72).
6. Remove the yellow notch filter (on page 73).
7. Remove the light sensor module (on page 72).
8. Remove the four screws connecting the rear optical housing to the front optical housing.
9. Remove the rear optical housing and the integrator from the front optical housing
10. Remove the four screws connecting the integrator assembly to the rear optical housing.
11. Disconnect the rear optical housing using one guide pin.
12. To re-install, follow these steps in reverse order.
M Series Service Guide
020-100551-11 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
71