Christie M Series Service Manual page 33

Error message
Red Comm
Red Offset
Red Reset
Red Therm
Shutter
TI Blue FW
TI Blue Sys
TI Green FW
TI Green Sys
TI Main Sys
TI Red FW
M Series Service Guide
020-100551-11 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Conditions
Red satellite communication error
Red offset under voltage
Red reset under voltage
Red DAD thermal shutdown
Shutter not detected
Failed to load blue TI firmware
Blue channel TI system failure
Failed to load Green TI firmware
Green channel TI system failure
Main TI system failure
Failed to load red TI firmware
Troubleshooting
• Check the red satellite
communication cables for loose
connection.
• Cycle AC power.
Replace the light engine.
Replace the light engine.
Allow the projector to cool down.
Check cables for loose connections.
• Check the blue satellite
communication cables for loose
connection.
• Replace the blue satellite
communication cable.
• Replace the light engine.
• Check the blue satellite
communication cables for loose
connection.
• Replace the blue satellite
communication cable.
• Replace the light engine.
• Check the green satellite
communication cables for loose
connection.
• Replace the green satellite
communication cable.
• Replace the light engine.
• Check the green satellite
communication cables for loose
connection.
• Replace the green satellite
communication cable.
• Replace the light engine.
Replace the panel driver.
• Check the red satellite
communication cables for loose
connection.
• Replace the red satellite
communication cable.
• Replace the light engine.
33