Removing The Lamp Fans (#3 And #8) - Christie M Series Service Manual

6. To re-install, follow these steps in reverse order.

Removing the lamp fans (#3 and #8)

Fan #3 is located outside the #2 lamp compartment and provides cooling to lamp #2. Fan #8 is
located outside the #1 lamp compartment and provides cooling to lamp #1. A guide pin is used so the
fan can only fit one way.
Estimated replacement time: 10 minutes per fan.
1. Remove the top cover (on page 45).
2. Remove the two screws from the fan.
3. Disconnect the fan wire at the quick disconnect coupling.
4. Cut the cable tie holding the wire to fan #9.
5. Remove the fan.
6. To re-install, follow these steps in reverse order.
M Series Service Guide
020-100551-11 Rev. 1 (01-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
54