Display Contents Of Standard I/F - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

11.1.3

Display contents of standard I/F

Described below are the display items on the standard I/F setting menu and their functions.
■1. Display item
Channel No.
specification
menu BOX
(1) Standard interface display BOX
The standard interface includes the following four types.
Standard I/F-1(RS422):
Standard I/F-2(RS232):
Standard I/F-3(USB):
Standard I/F-4(Ethermet): For communication with PC (drawing software) and other equipment
(2) Channel No. specification menu BOX
Set a channel number to be used by the standard interface.
➠
For the detail of the drivers which can be assigned to each channel, refer to this section (3).
0:
1, 2:
8:
*1
9:
*:
• "9" is automatically set to the standard I/F-3(USB).
11 - 2
11.1 Standard I/F Setting
Standard interface display BOX
For communication with PLC, microcomputer and other equipment
For communication with PLC, PC (drawing software), modem, other equipment,
bar code reader and transparent
For communication with PC (drawing software) and transparent
Standard I/F-2(RS-232)
Standard I/F-4(Ethernet)
11.1.5 Channel setting operation
Set when the communication interface is not used.
Set when connecting to a controller.
Set when connecting to a bar code reader or RFID.
Set when connecting to a PC (drawing software).
Set this channel when the gateway function (except when the connection with controllers is the
Ethernet connection) or the Ethernet download function is used.
Standard I/F-3(USB)
Standard I/F-1(RS-422)
Driver display BOX
Drv button