Sequence Program All Clear - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

16.2.13 Sequence program all clear

Clears all the sequence programs.
■1. Operation
Stop the FX PLC
■2. Example
Clears all the sequence programs.
Stop the FX PLC
MODE
NOP
0 NOP
1 OUT
2 LDI
3 MOV
A
16 - 32
16.2 FX List Editor
MODE NOP
(WRITE mode)
< READ >
Set the
WRITE
< WRITE >
mode.
Y 000
M 100
12
GO
POINT POINT POINT
Items cleared when All Clear for a sequence program is performed
When All Clear is executed, the parameters before program execution are initialized and Latch
Clear is executed.
The memory space becomes the default value, the comment area a 0 block, the file register
space a 0 block, and keywords unregistered.
After All Clear, set the above parameters etc. again.
A GO
! Caution
The program will be erased.
Press "OK" to continue.
OK Cancel
OK
0 NOP
1 NOP
2 NOP
3 NOP