Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual page 223

■1. Parameters and sequence programs are easy to maintain.
You can check or partly correct, change or add FX PLC parameters and sequence programs simply by operating keys.
You can easily edit sequence programs without preparing any peripheral unit other than the GOT.
(Example of changing sequence program commands)
Changed
LD X000
OUT Y020
LD X001
■2. Errors that occur during list editing can be checked easily.
Error messages, error codes, and number of steps for errors that occur in the FX PLC can be checked.
Details can be checked immediately even for errors that occur during list editing.
■3. Commands and devices can be searched and displayed.
Commands and devices used in sequence programs can be searched.
The correction position can be searched for cases such as when you want to correct a specific device.
LD X000
OUT Y030
LD X001
Searched device
M800
Displays the searched device.
LD M 800
OUT T 10
K 100
LD X 002
16.2 FX List Editor
16
16 - 15