16.3.3
Setting operation
16 - 44
16.3 FX3U-ENET-ADP Communication Setting Function
Touch the numerical part
of the octet to be changed.
Touch
Touch[×]
Touch [YES]
Step 1.
Touch the numerical part of the octet to
be changed among the 1st to 4th octets.
Step 2.
When the ten-key pad appears, enter a
numerical value in up to 3 digits, and
touch the
If a numerical value outside the setting
range is entered, the following error
message appears. Enter a numerical
value again.
For the details of the setting range, refer
to the following.
➠
16.3.1 Specifications
Step 3.
The changed IP address is displayed. At
this time, the changed communication
set value of the FX3U-ENET-ADP is not
written to the CPU. Touch the [ ] key.
Step 4.
When the screen shown on the left
appears, touch the
key.
key.
Continued to next page