Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual page 112

■3. Utility call key setting operation
12 - 12
12.2 Operation Setting (Settings for Operation)
POINT POINT POINT
(1) When the utility call key is not set (set to 0-point)
Even when the utility call key is not set (set to the zero point), you can display the main menu
by performing the following operation.
• Pressing the special function switch set on the user-created screen
➠
9.3.1 Display operation of main menu
(2) Precautions on using the alarm popup display
When [Display Position Switching] is set to [Yes] in the alarm popup display setting, set either
of the following for the utility call key.
Setting the position of the utility call key to the upper-right or lower-left corner
Setting [Press Time] of the utility call key to 1 or more seconds
When [Press Time] is set to 0 and the key position is set to the lower-left corner, the
operation is as described below. If the positions of the key and the alarm popup display
overlap, the utility screen appears by switching the display position of the alarm popup
display.
For the alarm popup display, refer to the following.
➠
GT Designer3 (GOT2000) Help
(3) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using GT
Designer3. If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for the details related to the password setting.
➠
GT Designer3 (GOT2000) Help
Step 1.
Touch or
four corners of the setting screen. The
button repeats
time it is pressed. Change the part to
be set as a key position to
For the key position, 0 or 1 point can
be specified.
Step 2.
When setting 1 point, specify the time
to switch to the utility in case of
keeping pressing the key position.
Touch the time input area.
Step 3.
Touching the input area displays a
keyboard.
Input numeric with the keyboard.
Step 4.
Touch the [ ] button to save the
changes.
displayed at the
every
.