■3. System configuration check sheet
Write the model of each unit in the following square brackets ([ ]).
(1) System configuration of the GOT
(a) GOT
(b) Communication interface
(c) Cable between the PLC and GOT
(d) Cable length
(2) System configuration of the PLC
(a) Power supply unit
(b) CPU module
(c) Serial communication unit
/computer link unit
(d) Network unit
(e) Interrupt module
(f) Positioning module
(g) Number of extended PLC stages
(h) When other units or devices are used, write their names.
Entry column for writing the status of the phenomenon (when the GOT still operates improperly after corrective actions are taken)
(3) Write the details of the error operations. (Such as when the GOT screen is frozen or the screen is displayed improperly)
22 - 10
22.1 GOT Restoration Sheets
[
[
[
[
[
[
[
Used
Not used
[
Used
Not used
Used
[
Not used
[
Used
Not used
[
]
]
]
m]
]
]
]
]
]
]
stages]