14.1.2
Clock synchronization method
The following shows the clock synchronization method on the GOT
Clock synchronization method
Adjust
14 - 2
14.1 Time Setting and Display
Acquire the clock data of the controller and change the clock data of the GOT.
2013/4/1
12 : 45 : 07
PLC
When the GOT is powered on, set the clock data of the GOT to that of the controller.
Since the GOT does not have to hold the clock data while the GOT is powered off, no battery is required.
To set the controller clock data of the controller, refer to the manual of the controller you use.
POINT
POINT
POINT
Details of the clock synchronization method
For the details of the clock synchronization method, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description
Clock data
GOT
2013/4/1
12 : 45 : 07