Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual page 47

POINT POINT POINT
Cautions on installation
(1) Tightening the mounting screw
Tighten the mounting screw within the specified torque.
Under tightening can cause the GOT to drop. In addition, undertightening can disable
waterproof or oil proof effect.
Failure to do so may damage the unit, or distort the panel and make a surface waviness on
the display area, leading to deterioration of the visibility or incorrect input from the touch
panel. In addition, undertightening can disable waterproof or oil proof effect.
• Specified torque range: 0.36 to 0.48N
(2) Installation panel surface
Make sure that the panel surface is free from warpage, flaws and irregularities. Warpage,
flaws and irregularities may disable the waterproof effect.
Select proper panel thickness under consideration of the panel strength.
(For example, the panel strength may be insufficient depending on the panel material and
dimensions even if the panel thickness is acceptable.
Insufficient panel strength may cause warpage depending on the installation positions of the
GOT and other equipment.)
·
m
6.5 Installation Procedure
6
6 - 5