15. CONTROL OF VARIOUS DATA (DATA CONTROL)
A system application, project data (screen data), or alarm data which is written in the GOT or SD card can be displayed, and
the data can be transferred between the GOT and SD card.
The format of the SD card is also possible.
15.1 Data Storage Location
15.1.1
Data type and storage location
■1. System
The data storage location and transferring (write/read) route for each data type are shown below.
Also, the data storage locations are shown below.
(Built-in flash memory)
System application
Boot OS
Install/
Project data
Download
(Built-in SD card)
(when installed in GOT)
The data of the build in flash memory (Project data, etc.) can be saved.
Item
Boot OS
*1
System application
*1
Project data
*1
The SD card can be used from Utility.
➠
*2
When using the project data stored in the Standard SD Card (A drive) with the GOT, hold the SD card installed to the GOT.
C drive
System application
Boot OS
Upload
Project data
A drive
SD card
Data type
Boot OS
Basic system application
Communication driver
Advanced system application
Project data
(Including recipe setting, alarm conditions, time action, and GOT setup.)
15.2 OS information
System application
Boot OS
Project data
Write
Read
Project data
GT Designer3
Copy files on
Windows
Project data
Inserting/
Removing
SD card
(when installed in PC)
Install, Write :
Upload, Read :
Built in flash memory (C drive)
Standard SD card (A drive)
Built in flash memory (C drive)
Standard SD card (A drive)
Built in flash memory (C drive)
15.1 Data Storage Location
PC
Write
Boot OS
Project data
Storage location
*2
*2
15 - 1
15