Got Self Check (Debug); Device Monitor Function; System Configuration - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

16. GOT SELF CHECK (DEBUG)

The debug includes functions to check the PLC system status and to improve troubleshooting efficiency.
The following is available as the debug.
Item
For a controller connected to the GOT, forcibly turning on or off devices of the controller and
Device monitor
changing the set value or present value are available.
FX list editor The sequence program of FX PLC can be list edited.
FX3U-ENET-ADP
communication setting The communication set value of the FX3U-ENET-ADP stored in the CPU can be changed.
function

16.1 Device Monitor Function

For a controller connected to the GOT, forcibly turning on or off devices of the controller and changing the set value or
present value are available.
16.1.1

System configuration

This section describes the controller names and connection types between the GOT and a controller that are applicable to
the device monitor function.
For details of communication units and cables for each connection type, refer to the following manual.
➠
■1. Target controller
Controller
QCPU (Q mode)
QnACPU
FX CPU
■2. Required system application
System application
Basic system application
Communication
driver
GOT2000 Series Connection Manual For GT Works3 Version1
Direct CPU connection, Computer link connection, CC-Link(G4) connection
Direct CPU connection, Computer link connection
Direct CPU connection
MELSEC-Q/L/QnA
MELSEC-FX
CC-Link(G4)
POINT POINT POINT
Checking method of the version of basic system application and communication driver
Check the version of the basic system application and communication driver installed in the GOT
at [System Application Information] of the utility.
Refer to the following for details.
➠
15.2 OS information
Description
Connection type
Version
-
-
-
-
16.1 Device Monitor Function
Reference
➠
16 - 1
➠
16 - 14
➠
16 - 42
16
16 - 1