Specifications; Standard Specifications - Mitsubishi Electric FR-LU08 Instruction Manual

5

SPECIFICATIONS

5.1

Standard specifications

Item
Surrounding air temperature
Surrounding air humidity
Storage temperature
Atmosphere
Altitude/vibration
Power supply
Connection
Display
Data retention
Number of write times
Mass

At low temperatures of less than 0°C, the LCD may be slower in operation.
At high temperatures, the life of the LCD and battery may become shorter.

Temperature applicable for a short time, such as in transit

The FR-LU08-01 is rated IP55 only when it is installed on the inverter.
NOTE
• Do not expose the LCD to direct sunlight.
• During transportation, avoid applying load to the LCD.
46
SPECIFICATIONS
-10°C to +50°C (non-freezing)
FR-LU08 90% RH or less (non-condensing)
FR-LU08-01 95% RH or less (non-condensing)
-20°C to +65°C

Indoors (free from corrosive gas, flammable gas, oil mist, dust and dirt)
2
Maximum 2500 m, 5.9 m/s or less at 10 to 55 Hz (directions of X, Y, Z axes)
Power input from the inverter
Installed to the inverter or connected to the inverter by a dedicated cable
Liquid crystal display (LCD)
Built-in EEPROM
Maximum 100,000 times
Approximately 300 g
Specifications

