Operation Of Restore - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

15.8.8

Operation of restore

This section describes the restoration operation screen.
The screen operation procedure varies depending on the PLC CPU type and password status. For the details of the
operation procedure, refer to the following.
➠
15 - 58
15.8 BACKUP/RESTORE
15.8.5 Security and password
Step 1.
Touch [Restore].
Step 2.
Select the CPU unit to be restored by
pressing a switch (among [CPU No.
1], [CPU No. 2], [CPU No. 3] and
[CPU No. 4]).
When the connected equipment is an
FX CPU, touching any switch (among
[CPU No. 1], [CPU No. 2], [CPU No.
3] and [CPU No. 4]) is invalid.
Step 3.
Touch [Execute].
Step 4.
When the left screen appears, touch
[YES].
(Continued to next page)